[ADIMO007]

Adds linux-file-converter to the catalog.

Repository: https://github.com/ADIMO07/linux-file-converter

[github-actions]

❌ Test failure

@ADIMO07: this pull request adds the AppImage from your GitHub repository to the AppImage catalog; the test reports the following. Could you have a look?

• The repository in the file in data/ was not found (it may have been renamed, deleted or made private). Please put the current repository URL (or the download URL of the AppImage) into the file in data/.

First error in the log:

Unable to get the releases of the repository https://github.com/ADIMO07/linux-file-converter. Does the repository exist, and is it public?

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit 9278c5a. Full log

[github-actions]

❌ Test failure

Tested:

• Linux_File_Converter-x86_64.AppImage from release v1.0.0

Names:

WARNING: AppImage name 'Linux_File_Converter-x86_64.AppImage': should not contain 'Linux', since all AppImages are for Linux (e.g. 'App-1.0-x86_64.AppImage', not 'App-1.0-linux-x86_64.AppImage')
WARNING: File name 'linux-file-converter': contains 'Linux', which the application's name ('Linux File Converter') does too; fine if that is really the application's name

Notes:

• File name 'linux-file-converter': all-lowercase names are typically used for command line tools, but the desktop file does not set Terminal=true. If this is a graphical application, please name the file after the application as it is spelled, with capitals where it has them (e.g. 'Krita'); if it is a command line tool, set Terminal=true in its desktop file.

• Please check the remarks about the names below.

First error in the log:

AppImage type 2 detected

/tmp/.mount_runtimBPblKp
WARNING: No appdata file present. Please provide one in the AppImage as per the instructions on https://www.freedesktop.org/software/appstream/docs/chap-Quickstart.html#sect-Quickstart-DesktopApps
Lint found no fatal issues

===========================================

WARNING: File name 'linux-file-converter': contains 'Linux', which the application's name ('Linux File Converter') does too; fine if that is really the application's name
NOTE: File name 'linux-file-converter': all-lowercase names are typically used for command line tools, but the desktop file does not set Terminal=true. If this is a graphical application, please name the file after the application as it is spelled, with capitals where it has them (e.g. 'Krita'); if 

ICON_NAME: linux-file-converter

/tmp/.mount_runtimBPblKp/usr/share/icons/hicolor/256x256/apps/linux-file-converter.png

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit a4d49b4. Full log

[github-actions]

❌ Test failure

Tested:

• Linux_File_Converter-x86_64.AppImage from release v1.0.1

Compatibility: not self-contained: uses the C library of the system; uses an old AppImage runtime that needs the C library (and libfuse2) of the system; references glibc 2.14

Names:

WARNING: AppImage name 'Linux_File_Converter-x86_64.AppImage': should not contain 'Linux', since all AppImages are for Linux (e.g. 'App-1.0-x86_64.AppImage', not 'App-1.0-linux-x86_64.AppImage')
WARNING: File name 'linux-file-converter': contains 'Linux', which the application's name ('Linux File Converter') does too; fine if that is really the application's name

Notes:

• File name 'linux-file-converter': all-lowercase names are typically used for command line tools, but the desktop file does not set Terminal=true. If this is a graphical application, please name the file after the application as it is spelled, with capitals where it has them (e.g. 'Krita'); if it is a command line tool, set Terminal=true in its desktop file.

• The application quit or crashed right after starting; the error below usually shows why. Note that the test runs the application without network access, on purpose, and that this is a requirement for the catalog: an AppImage must start without network (users are offline too). If the application needs a server, a login or an update check to start, please make it show its window (or at least a message) first and connect afterwards, and handle a failed connection instead of exiting.

• Please check the remarks about the names below.

First error in the log:

Traceback (most recent call last):
  File "/run/firejail/appimage/usr/share/linux-file-converter/src/main.py", line 6, in <module>
    from PyQt5.QtWidgets import QApplication
ModuleNotFoundError: No module named 'PyQt5'

ERROR: The application exited within 11 seconds instead of showing a window

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit f717ba4. Full log

[github-actions]

❌ Test failure

Tested:

• File_Converter-x86_64.AppImage from release v1.0.1

Names:

ERROR: File name 'linux-file-converter': must not contain 'Linux' (all AppImages are for Linux) unless it is part of the application's name ('File Converter')

Notes:

• File name 'linux-file-converter': all-lowercase names are typically used for command line tools, but the desktop file does not set Terminal=true. If this is a graphical application, please name the file after the application as it is spelled, with capitals where it has them (e.g. 'Krita'); if it is a command line tool, set Terminal=true in its desktop file.

• The name of the file in data/ does not follow the rules (see below): it must be the name of the application, without blanks (use _), architecture, file extension, "AppImage" or "Linux".

First error in the log:

ERROR: File name 'linux-file-converter': must not contain 'Linux' (all AppImages are for Linux) unless it is part of the application's name ('File Converter')
NOTE: File name 'linux-file-converter': all-lowercase names are typically used for command line tools, but the desktop file does not set Terminal=true. If this is a graphical application, please name the file after the application as it is spelled, with capitals where it has them (e.g. 'Krita'); if 

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit 4bfbee6. Full log

[github-actions]

❌ Test failure

Tested:

• File_Converter-x86_64.AppImage from release v1.0.1

Names:

ERROR: File name 'linux-file-converter': must not contain 'Linux' (all AppImages are for Linux) unless it is part of the application's name ('File Converter')

Notes:

• File name 'linux-file-converter': all-lowercase names are typically used for command line tools, but the desktop file does not set Terminal=true. If this is a graphical application, please name the file after the application as it is spelled, with capitals where it has them (e.g. 'Krita'); if it is a command line tool, set Terminal=true in its desktop file.

• The name of the file in data/ does not follow the rules (see below): it must be the name of the application, without blanks (use _), architecture, file extension, "AppImage" or "Linux".

First error in the log:

ERROR: File name 'linux-file-converter': must not contain 'Linux' (all AppImages are for Linux) unless it is part of the application's name ('File Converter')
NOTE: File name 'linux-file-converter': all-lowercase names are typically used for command line tools, but the desktop file does not set Terminal=true. If this is a graphical application, please name the file after the application as it is spelled, with capitals where it has them (e.g. 'Krita'); if 

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit e9c1acd. Full log

[github-actions]

❌ Test failure

Names:

ERROR: File name 'File_Converter-x86_64': looks like the name of an AppImage file; use the name of the application instead (e.g. 'App', not 'App-1.0-x86_64.AppImage')

• The name of the file in data/ does not follow the rules (see below): it must be the name of the application, without blanks (use _), architecture, file extension, "AppImage" or "Linux".

First error in the log:

ERROR: File name 'File_Converter-x86_64': looks like the name of an AppImage file; use the name of the application instead (e.g. 'App', not 'App-1.0-x86_64.AppImage')

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit a2b0a05. Full log

[github-actions]

❌ Test failure

Tested:

• Linux_File_Converter-x86_64.AppImage from release v1.0.1

Compatibility: not self-contained: uses the C library of the system; uses an old AppImage runtime that needs the C library (and libfuse2) of the system; references glibc 2.14

Names:

WARNING: AppImage name 'Linux_File_Converter-x86_64.AppImage': should not contain 'Linux', since all AppImages are for Linux (e.g. 'App-1.0-x86_64.AppImage', not 'App-1.0-linux-x86_64.AppImage')

• The application quit or crashed right after starting; the error below usually shows why. Note that the test runs the application without network access, on purpose, and that this is a requirement for the catalog: an AppImage must start without network (users are offline too). If the application needs a server, a login or an update check to start, please make it show its window (or at least a message) first and connect afterwards, and handle a failed connection instead of exiting.
• Please check the remarks about the names below.

First error in the log:

Traceback (most recent call last):
  File "/run/firejail/appimage/usr/share/linux-file-converter/src/main.py", line 6, in <module>
    from PyQt5.QtWidgets import QApplication
ModuleNotFoundError: No module named 'PyQt5'

ERROR: The application exited within 11 seconds instead of showing a window

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit ed1cf6e. Full log

[github-actions]

❌ Test failure

Tested:

• File_Converter-x86_64.AppImage from release v1.0.1

Compatibility: not self-contained: uses the C library of the system; uses an old AppImage runtime that needs the C library (and libfuse2) of the system; references glibc 2.14

• The application quit or crashed right after starting; the error below usually shows why. Note that the test runs the application without network access, on purpose, and that this is a requirement for the catalog: an AppImage must start without network (users are offline too). If the application needs a server, a login or an update check to start, please make it show its window (or at least a message) first and connect afterwards, and handle a failed connection instead of exiting.

First error in the log:

Traceback (most recent call last):
  File "/run/firejail/appimage/usr/share/linux-file-converter/main.py", line 6, in <module>
    from PyQt5.QtWidgets import QApplication
ModuleNotFoundError: No module named 'PyQt5'

ERROR: The application exited within 11 seconds instead of showing a window

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit d25a329. Full log