Skip to content

air: Include run details in air get JSON - #7624

Merged
artemy-kolesnikov merged 17 commits into
mainfrom
CNXT-2612-air-get-json-details
Nov 16, 2026
Merged

artemy-kolesnikov merged 17 commits into
mainfrom
CNXT-2612-air-get-json-details

Conversation

@artemy-kolesnikov

Copy link
Copy Markdown
Contributor

Changes

Add typed run details to air get -o json, including flat accelerator fields, environment, user, MLflow run name, retry-limit provenance and sweep details. --include-config opts into the stored config and its source. Downloaded configs larger than 1 MiB are omitted.

Why

The text view exposes run details that machine-readable output omits, forcing consumers to parse the text display. Config is opt-in because it can contain plaintext environment variables and parameters. Without the flag, JSON does not read the config, so a retry limit that is not reported by the run is null even when text can derive it from the stored config. This change depends on the retry-limit patch in #7623.

Tests

  • AIR and library Go tests, targeted race tests, AIR acceptance fixtures, Go lint and formatting, and changelog validation.
  • Read-only checks against a workspace on three existing runs compare text and existing JSON fields against the air: Stop showing Max Retries 0 when runs/get omits the retry limit #7623 baseline, and check default versus opted-in JSON. No workloads were submitted.
  • A transport-level regression test checks the 1 MiB limit before SDK response buffering, including JSON responses; sweep lookup failure serializes tasks as an empty array.

This pull request and its description were written by Isaac.

artemy-kolesnikov and others added 2 commits November 13, 2026 23:19
Jobs runs/get leaves max_retries out of every task run, and the SDK decodes
the missing field as 0, so `air get` and the `air list` info pane showed
"Max Retries 0" even for runs submitted with the default of 3 or an explicit
limit .

The server value is now used only when the response carries the key. For a
one-time submit run, the limit is read from the run's uploaded training
config: the configured value when it sets max_retries, and "3 (CLI default)"
for ai_runtime_task runs that leave it unset, since the CLI always submits
its default. Job runs, multi-container runs, legacy gen_ai_compute_task runs
with no explicit value, and runs whose config can't be read show N/A.

The derivation is resolveMaxRetries, which returns the limit and its source
so `air get -o json` can expose the same value later.

Co-authored-by: Isaac <no-reply@databricks.com>
Expose typed accelerator, environment, retry, user, MLflow and sweep details without changing existing JSON fields. Read and emit the stored config only when --include-config is passed, because it may contain plaintext environment variables and parameters. Without it, config-derived retry limits remain unknown.

Bound config downloads before SDK response buffering and omit oversized files in text and JSON. Guarantee an empty array for sweep tasks when iteration lookup fails.

Co-authored-by: Isaac <no-reply@databricks.com>
@github-actions

github-actions Bot commented Nov 13, 2026 •

Copy link
Copy Markdown
Contributor

Commit: 75286903b | Workflow run

Regression test report

Selected 5 changed tests (limit=20, 0 not selected)

5 tests: regression=5 unreleased=0 coverage=0 failing=0
test branch main (ce48e57) latest (v1.26.0)
TestAccept/air/get ✅ ❌ ❌
TestAccept/air/get-ai-runtime ✅ ❌ ❌
TestAccept/air/get-mlflow-retry ✅ ❌ ❌
TestAccept/air/get-pending ✅ ❌ ❌
TestAccept/air/help ✅ ❌ ❌
TestAccept/air/get: branch ✅ | main (ce48e57) ❌ | latest (v1.26.0) ❌

main (ce48e57):

acceptance_test.go:1380: Diff:
        --- air/get/output.txt
        +++ /tmp/TestAcceptairget3344354198/002/output.txt
        @@ -51,15 +51,7 @@
             "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
             "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
             "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": null,
        -    "base_environment": null,
        -    "max_retries": null,
        -    "mlflow_run_name": "my-run",
        -    "sweep": null
        +    "est_percent_complete": null
           }
         }

latest (v1.26.0):

acceptance_test.go:1380: Diff:
        --- air/get/output.txt
        +++ /tmp/TestAcceptairget226709147/002/output.txt
        @@ -22,7 +22,7 @@
         │  Status        ● SUCCESS                                       │
         │  Submitted     2023-11-14 22:13 UTC                            │
         │  Retries       0                                               │
        -│  Max Retries   N/A                                             │
        +│  Max Retries   0                                               │
         │  Duration      12s                                             │
         │  Experiment    my-exp                                          │
         │  MLflow Run    my-run                                          │
        @@ -49,17 +49,9 @@
             "attempt_number": 0,
             "experiment_name": "my-exp",
             "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
        -    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
        +    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/artifacts/logs/node_0",
             "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": null,
        -    "base_environment": null,
        -    "max_retries": null,
        -    "mlflow_run_name": "my-run",
        -    "sweep": null
        +    "est_percent_complete": null
           }
         }
TestAccept/air/get-ai-runtime: branch ✅ | main (ce48e57) ❌ | latest (v1.26.0) ❌

main (ce48e57):

acceptance_test.go:1380: Diff:
        --- air/get-ai-runtime/output.txt
        +++ /tmp/TestAcceptairget-ai-runtime2924894376/002/output.txt
        @@ -51,142 +51,26 @@
             "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
             "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
             "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": "4",
        -    "base_environment": null,
        -    "max_retries": null,
        -    "mlflow_run_name": "my-run",
        -    "sweep": null
        +    "est_percent_complete": null
           }
         }
         
         === get (json, include config)
         
         >>> [CLI] air get 123 -o json --include-config
        -{
        -  "v": 1,
        -  "ts": "[TIMESTAMP]",
        -  "data": {
        -    "run_id": "123",
        -    "status": "SUCCESS",
        -    "started_at": "[TIMESTAMP]",
        -    "duration_seconds": 12,
        -    "attempt_number": 0,
        -    "experiment_name": "my-exp",
        -    "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
        -    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
        -    "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": "4",
        -    "base_environment": null,
        -    "max_retries": {
        -      "limit": 3,
        -      "source": "cli_default"
        -    },
        -    "mlflow_run_name": "my-run",
        -    "sweep": null,
        -    "config": "experiment_name: my-exp\ncompute:\n  accelerator_type: a10\n  num_accelerators: 1\ncommand: |-\n  for i in $(seq 1 10); do\n    echo \"step $i\"\n  done\n",
        -    "config_source": "uploaded"
        -  }
        -}
        +Error: unknown flag: --include-config
         
        -=== get (text, max_retries set in the config)
        +Usage:
        +  databricks air get JOB_RUN_ID [flags]
         
        ->>> [CLI] air get 123
        +Flags:
        +  -h, --help[=true|false]   help for get
         
        -╭─ Configuration ────────────────────────────────────────────────╮
        -│                                                                │
        -│  experiment_name: my-exp                                       │
        -│  compute:                                                      │
        -│    accelerator_type: a10                                       │
        -│    num_accelerators: 1                                         │
        -│  max_retries: 1                                                │
        -│  command: echo ok                                              │
        -│                                                                │
        -╰────────────────────────────────────────────────────────────────╯
        +Global Flags:
        +      --debug[=true|false]   enable debug logging
        +  -o, --output type          output type: text or json (default text)
        +  -p, --profile string       ~/.databrickscfg profile
        +  -t, --target string        bundle target to use (if applicable)
         
        -╭─ Metadata ─────────────────────────────────────────────────────╮
        -│                                                                │
        -│  Run ID        123                                             │
        -│  Status        ● SUCCESS                                       │
        -│  Submitted     2023-11-14 22:13 UTC                            │
        -│  Retries       0                                               │
        -│  Max Retries   1                                               │
        -│  Duration      12s                                             │
        -│  Experiment    my-exp                                          │
        -│  MLflow Run    my-run                                          │
        -│  User          user@example.com                                │
        -│  Accelerators  1x A10                                          │
        -│  Environment   4                                               │
        -│                                                                │
        -╰────────────────────────────────────────────────────────────────╯
         
        -Run URL:    [DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]
        -MLflow URL: [DATABRICKS_URL]/ml/experiments/exp1/runs/run1
        -
        -=== get (json, max_retries set in the config)
        -
        ->>> [CLI] air get 123 -o json
        -{
        -  "v": 1,
        -  "ts": "[TIMESTAMP]",
        -  "data": {
        -    "run_id": "123",
        -    "status": "SUCCESS",
        -    "started_at": "[TIMESTAMP]",
        -    "duration_seconds": 12,
        -    "attempt_number": 0,
        -    "experiment_name": "my-exp",
        -    "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
        -    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
        -    "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": "4",
        -    "base_environment": null,
        -    "max_retries": null,
        -    "mlflow_run_name": "my-run",
        -    "sweep": null
        -  }
        -}
        -
        -=== get (json, include config, max_retries set)
        -
        ->>> [CLI] air get 123 -o json --include-config
        -{
        -  "v": 1,
        -  "ts": "[TIMESTAMP]",
        -  "data": {
        -    "run_id": "123",
        -    "status": "SUCCESS",
        -    "started_at": "[TIMESTAMP]",
        -    "duration_seconds": 12,
        -    "attempt_number": 0,
        -    "experiment_name": "my-exp",
        -    "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
        -    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
        -    "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": "4",
        -    "base_environment": null,
        -    "max_retries": {
        -      "limit": 1,
        -      "source": "configured"
        -    },
        -    "mlflow_run_name": "my-run",
        -    "sweep": null,
        -    "config": "experiment_name: my-exp\ncompute:\n  accelerator_type: a10\n  num_accelerators: 1\nmax_retries: 1\ncommand: echo ok\n",
        -    "config_source": "uploaded"
        -  }
        -}
        +Exit code: 1
        
    acceptance_test.go:1158: LOG.import: 
    acceptance_test.go:1158: LOG.mkdirs:

latest (v1.26.0):

acceptance_test.go:1380: Diff:
        --- air/get-ai-runtime/output.txt
        +++ /tmp/TestAcceptairget-ai-runtime841508854/002/output.txt
        @@ -22,7 +22,7 @@
         │  Status        ● SUCCESS                                       │
         │  Submitted     2023-11-14 22:13 UTC                            │
         │  Retries       0                                               │
        -│  Max Retries   3 (CLI default)                                 │
        +│  Max Retries   0                                               │
         │  Duration      12s                                             │
         │  Experiment    my-exp                                          │
         │  MLflow Run    my-run                                          │
        @@ -49,144 +49,28 @@
             "attempt_number": 0,
             "experiment_name": "my-exp",
             "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
        -    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
        +    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/artifacts/logs/node_0",
             "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": "4",
        -    "base_environment": null,
        -    "max_retries": null,
        -    "mlflow_run_name": "my-run",
        -    "sweep": null
        +    "est_percent_complete": null
           }
         }
         
         === get (json, include config)
         
         >>> [CLI] air get 123 -o json --include-config
        -{
        -  "v": 1,
        -  "ts": "[TIMESTAMP]",
        -  "data": {
        -    "run_id": "123",
        -    "status": "SUCCESS",
        -    "started_at": "[TIMESTAMP]",
        -    "duration_seconds": 12,
        -    "attempt_number": 0,
        -    "experiment_name": "my-exp",
        -    "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
        -    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
        -    "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": "4",
        -    "base_environment": null,
        -    "max_retries": {
        -      "limit": 3,
        -      "source": "cli_default"
        -    },
        -    "mlflow_run_name": "my-run",
        -    "sweep": null,
        -    "config": "experiment_name: my-exp\ncompute:\n  accelerator_type: a10\n  num_accelerators: 1\ncommand: |-\n  for i in $(seq 1 10); do\n    echo \"step $i\"\n  done\n",
        -    "config_source": "uploaded"
        -  }
        -}
        +Error: unknown flag: --include-config
         
        -=== get (text, max_retries set in the config)
        +Usage:
        +  databricks air get JOB_RUN_ID [flags]
         
        ->>> [CLI] air get 123
        +Flags:
        +  -h, --help   help for get
         
        -╭─ Configuration ────────────────────────────────────────────────╮
        -│                                                                │
        -│  experiment_name: my-exp                                       │
        -│  compute:                                                      │
        -│    accelerator_type: a10                                       │
        -│    num_accelerators: 1                                         │
        -│  max_retries: 1                                                │
        -│  command: echo ok                                              │
        -│                                                                │
        -╰────────────────────────────────────────────────────────────────╯
        +Global Flags:
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
         
        -╭─ Metadata ─────────────────────────────────────────────────────╮
        -│                                                                │
        -│  Run ID        123                                             │
        -│  Status        ● SUCCESS                                       │
        -│  Submitted     2023-11-14 22:13 UTC                            │
        -│  Retries       0                                               │
        -│  Max Retries   1                                               │
        -│  Duration      12s                                             │
        -│  Experiment    my-exp                                          │
        -│  MLflow Run    my-run                                          │
        -│  User          user@example.com                                │
        -│  Accelerators  1x A10                                          │
        -│  Environment   4                                               │
        -│                                                                │
        -╰────────────────────────────────────────────────────────────────╯
         
        -Run URL:    [DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]
        -MLflow URL: [DATABRICKS_URL]/ml/experiments/exp1/runs/run1
        -
        -=== get (json, max_retries set in the config)
        -
        ->>> [CLI] air get 123 -o json
        -{
        -  "v": 1,
        -  "ts": "[TIMESTAMP]",
        -  "data": {
        -    "run_id": "123",
        -    "status": "SUCCESS",
        -    "started_at": "[TIMESTAMP]",
        -    "duration_seconds": 12,
        -    "attempt_number": 0,
        -    "experiment_name": "my-exp",
        -    "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
        -    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
        -    "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": "4",
        -    "base_environment": null,
        -    "max_retries": null,
        -    "mlflow_run_name": "my-run",
        -    "sweep": null
        -  }
        -}
        -
        -=== get (json, include config, max_retries set)
        -
        ->>> [CLI] air get 123 -o json --include-config
        -{
        -  "v": 1,
        -  "ts": "[TIMESTAMP]",
        -  "data": {
        -    "run_id": "123",
        -    "status": "SUCCESS",
        -    "started_at": "[TIMESTAMP]",
        -    "duration_seconds": 12,
        -    "attempt_number": 0,
        -    "experiment_name": "my-exp",
        -    "dashboard_url": "[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]",
        -    "mlflow_url": "[DATABRICKS_URL]/ml/experiments/exp1/runs/run1/logs",
        -    "est_remaining_seconds": null,
        -    "est_percent_complete": null,
        -    "user": "user@example.com",
        -    "accelerator_type": "GPU_1xA10",
        -    "num_accelerators": 1,
        -    "environment_version": "4",
        -    "base_environment": null,
        -    "max_retries": {
        -      "limit": 1,
        -      "source": "configured"
        -    },
        -    "mlflow_run_name": "my-run",
        -    "sweep": null,
        -    "config": "experiment_name: my-exp\ncompute:\n  accelerator_type: a10\n  num_accelerators: 1\nmax_retries: 1\ncommand: echo ok\n",
        -    "config_source": "uploaded"
        -  }
        -}
        +Exit code: 1
        
    acceptance_test.go:1158: LOG.import: 
    acceptance_test.go:1158: LOG.mkdirs:
TestAccept/air/get-mlflow-retry: branch ✅ | main (ce48e57) ❌ | latest (v1.26.0) ❌

main (ce48e57):

acceptance_test.go:1380: 
        	Error Trace:	/home/runner/work/cli/cli/libs/testdiff/testdiff.go:22
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1380
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1121
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:666
        	Error:      	Not equal: 
        	            	expected: "\n=== get of a failed retry with no mlflow output (json)\n\n>>> [CLI] air get 123 -o json\n{\n  \"v\": 1,\n  \"ts\": \"[TIMESTAMP]\",\n  \"data\": {\n    \"run_id\": \"123\",\n    \"status\": \"FAILED\",\n    \"started_at\": \"[TIMESTAMP]\",\n    \"duration_seconds\": 12,\n    \"attempt_number\": 2,\n    \"experiment_name\": null,\n    \"dashboard_url\": \"[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]\",\n    \"mlflow_url\": null,\n    \"termination_reason\": \"Out of capacity\",\n    \"est_remaining_seconds\": null,\n    \"est_percent_complete\": null,\n    \"user\": null,\n    \"accelerator_type\": null,\n    \"num_accelerators\": null,\n    \"environment_version\": null,\n    \"base_environment\": null,\n    \"max_retries\": null,\n    \"mlflow_run_name\": null,\n    \"sweep\": null\n  }\n}\n"
        	            	actual  : "\n=== get of a failed retry with no mlflow output (json)\n\n>>> [CLI] air get 123 -o json\n{\n  \"v\": 1,\n  \"ts\": \"[TIMESTAMP]\",\n  \"data\": {\n    \"run_id\": \"123\",\n    \"status\": \"FAILED\",\n    \"started_at\": \"[TIMESTAMP]\",\n    \"duration_seconds\": 12,\n    \"attempt_number\": 2,\n    \"experiment_name\": null,\n    \"dashboard_url\": \"[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]\",\n    \"mlflow_url\": null,\n    \"termination_reason\": \"Out of capacity\",\n    \"est_remaining_seconds\": null,\n    \"est_percent_complete\": null\n  }\n}\n"
        	            	
        	            	Diff:
        	            	--- Expected
        	            	+++ Actual
        	            	@@ -18,11 +18,3 @@
        	            	     "est_remaining_seconds": null,
        	            	-    "est_percent_complete": null,
        	            	-    "user": null,
        	            	-    "accelerator_type": null,
        	            	-    "num_accelerators": null,
        	            	-    "environment_version": null,
        	            	-    "base_environment": null,
        	            	-    "max_retries": null,
        	            	-    "mlflow_run_name": null,
        	            	-    "sweep": null
        	            	+    "est_percent_complete": null
        	            	   }
        	Test:       	TestAccept/air/get-mlflow-retry
        	Messages:   	air/get-mlflow-retry/output.txt vs /tmp/TestAcceptairget-mlflow-retry190645445/002/output.txt

latest (v1.26.0):

acceptance_test.go:1380: 
        	Error Trace:	/home/runner/work/cli/cli/libs/testdiff/testdiff.go:22
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1380
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1121
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:666
        	Error:      	Not equal: 
        	            	expected: "\n=== get of a failed retry with no mlflow output (json)\n\n>>> [CLI] air get 123 -o json\n{\n  \"v\": 1,\n  \"ts\": \"[TIMESTAMP]\",\n  \"data\": {\n    \"run_id\": \"123\",\n    \"status\": \"FAILED\",\n    \"started_at\": \"[TIMESTAMP]\",\n    \"duration_seconds\": 12,\n    \"attempt_number\": 2,\n    \"experiment_name\": null,\n    \"dashboard_url\": \"[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]\",\n    \"mlflow_url\": null,\n    \"termination_reason\": \"Out of capacity\",\n    \"est_remaining_seconds\": null,\n    \"est_percent_complete\": null,\n    \"user\": null,\n    \"accelerator_type\": null,\n    \"num_accelerators\": null,\n    \"environment_version\": null,\n    \"base_environment\": null,\n    \"max_retries\": null,\n    \"mlflow_run_name\": null,\n    \"sweep\": null\n  }\n}\n"
        	            	actual  : "\n=== get of a failed retry with no mlflow output (json)\n\n>>> [CLI] air get 123 -o json\n{\n  \"v\": 1,\n  \"ts\": \"[TIMESTAMP]\",\n  \"data\": {\n    \"run_id\": \"123\",\n    \"status\": \"FAILED\",\n    \"started_at\": \"[TIMESTAMP]\",\n    \"duration_seconds\": 12,\n    \"attempt_number\": 2,\n    \"experiment_name\": null,\n    \"dashboard_url\": \"[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]\",\n    \"mlflow_url\": null,\n    \"termination_reason\": \"Out of capacity\",\n    \"est_remaining_seconds\": null,\n    \"est_percent_complete\": null\n  }\n}\n"
        	            	
        	            	Diff:
        	            	--- Expected
        	            	+++ Actual
        	            	@@ -18,11 +18,3 @@
        	            	     "est_remaining_seconds": null,
        	            	-    "est_percent_complete": null,
        	            	-    "user": null,
        	            	-    "accelerator_type": null,
        	            	-    "num_accelerators": null,
        	            	-    "environment_version": null,
        	            	-    "base_environment": null,
        	            	-    "max_retries": null,
        	            	-    "mlflow_run_name": null,
        	            	-    "sweep": null
        	            	+    "est_percent_complete": null
        	            	   }
        	Test:       	TestAccept/air/get-mlflow-retry
        	Messages:   	air/get-mlflow-retry/output.txt vs /tmp/TestAcceptairget-mlflow-retry4163774036/002/output.txt
FAIL
TestAccept/air/get-pending: branch ✅ | main (ce48e57) ❌ | latest (v1.26.0) ❌

main (ce48e57):

acceptance_test.go:1380: 
        	Error Trace:	/home/runner/work/cli/cli/libs/testdiff/testdiff.go:22
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1380
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1121
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:666
        	Error:      	Not equal: 
        	            	expected: "\n>>> [CLI] air get 123 -o json\n{\n  \"v\": 1,\n  \"ts\": \"[TIMESTAMP]\",\n  \"data\": {\n    \"run_id\": \"123\",\n    \"status\": \"PENDING\",\n    \"started_at\": null,\n    \"duration_seconds\": null,\n    \"attempt_number\": 0,\n    \"experiment_name\": \"my-exp\",\n    \"dashboard_url\": \"[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]\",\n    \"mlflow_url\": null,\n    \"status_message\": \"Waiting for accelerator compute capacity to become available...\",\n    \"est_remaining_seconds\": null,\n    \"est_percent_complete\": null,\n    \"user\": \"user@example.com\",\n    \"accelerator_type\": \"GPU_1xA10\",\n    \"num_accelerators\": 1,\n    \"environment_version\": null,\n    \"base_environment\": null,\n    \"max_retries\": {\n      \"limit\": 0,\n      \"source\": \"reported\"\n    },\n    \"mlflow_run_name\": null,\n    \"sweep\": null\n  }\n}\n"
        	            	actual  : "\n>>> [CLI] air get 123 -o json\n{\n  \"v\": 1,\n  \"ts\": \"[TIMESTAMP]\",\n  \"data\": {\n    \"run_id\": \"123\",\n    \"status\": \"PENDING\",\n    \"started_at\": null,\n    \"duration_seconds\": null,\n    \"attempt_number\": 0,\n    \"experiment_name\": \"my-exp\",\n    \"dashboard_url\": \"[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]\",\n    \"mlflow_url\": null,\n    \"status_message\": \"Waiting for accelerator compute capacity to become available...\",\n    \"est_remaining_seconds\": null,\n    \"est_percent_complete\": null\n  }\n}\n"
        	            	
        	            	Diff:
        	            	--- Expected
        	            	+++ Actual
        	            	@@ -16,14 +16,3 @@
        	            	     "est_remaining_seconds": null,
        	            	-    "est_percent_complete": null,
        	            	-    "user": "user@example.com",
        	            	-    "accelerator_type": "GPU_1xA10",
        	            	-    "num_accelerators": 1,
        	            	-    "environment_version": null,
        	            	-    "base_environment": null,
        	            	-    "max_retries": {
        	            	-      "limit": 0,
        	            	-      "source": "reported"
        	            	-    },
        	            	-    "mlflow_run_name": null,
        	            	-    "sweep": null
        	            	+    "est_percent_complete": null
        	            	   }
        	Test:       	TestAccept/air/get-pending
        	Messages:   	air/get-pending/output.txt vs /tmp/TestAcceptairget-pending1055322286/002/output.txt

latest (v1.26.0):

acceptance_test.go:1380: 
        	Error Trace:	/home/runner/work/cli/cli/libs/testdiff/testdiff.go:22
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1380
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1121
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:666
        	Error:      	Not equal: 
        	            	expected: "\n>>> [CLI] air get 123 -o json\n{\n  \"v\": 1,\n  \"ts\": \"[TIMESTAMP]\",\n  \"data\": {\n    \"run_id\": \"123\",\n    \"status\": \"PENDING\",\n    \"started_at\": null,\n    \"duration_seconds\": null,\n    \"attempt_number\": 0,\n    \"experiment_name\": \"my-exp\",\n    \"dashboard_url\": \"[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]\",\n    \"mlflow_url\": null,\n    \"status_message\": \"Waiting for accelerator compute capacity to become available...\",\n    \"est_remaining_seconds\": null,\n    \"est_percent_complete\": null,\n    \"user\": \"user@example.com\",\n    \"accelerator_type\": \"GPU_1xA10\",\n    \"num_accelerators\": 1,\n    \"environment_version\": null,\n    \"base_environment\": null,\n    \"max_retries\": {\n      \"limit\": 0,\n      \"source\": \"reported\"\n    },\n    \"mlflow_run_name\": null,\n    \"sweep\": null\n  }\n}\n"
        	            	actual  : "\n>>> [CLI] air get 123 -o json\n{\n  \"v\": 1,\n  \"ts\": \"[TIMESTAMP]\",\n  \"data\": {\n    \"run_id\": \"123\",\n    \"status\": \"RUNNING\",\n    \"started_at\": null,\n    \"duration_seconds\": null,\n    \"attempt_number\": 0,\n    \"experiment_name\": \"my-exp\",\n    \"dashboard_url\": \"[DATABRICKS_URL]/jobs/runs/123?o=[WORKSPACE_ID]\",\n    \"mlflow_url\": null,\n    \"est_remaining_seconds\": null,\n    \"est_percent_complete\": null\n  }\n}\n"
        	            	
        	            	Diff:
        	            	--- Expected
        	            	+++ Actual
        	            	@@ -7,3 +7,3 @@
        	            	     "run_id": "123",
        	            	-    "status": "PENDING",
        	            	+    "status": "RUNNING",
        	            	     "started_at": null,
        	            	@@ -14,16 +14,4 @@
        	            	     "mlflow_url": null,
        	            	-    "status_message": "Waiting for accelerator compute capacity to become available...",
        	            	     "est_remaining_seconds": null,
        	            	-    "est_percent_complete": null,
        	            	-    "user": "user@example.com",
        	            	-    "accelerator_type": "GPU_1xA10",
        	            	-    "num_accelerators": 1,
        	            	-    "environment_version": null,
        	            	-    "base_environment": null,
        	            	-    "max_retries": {
        	            	-      "limit": 0,
        	            	-      "source": "reported"
        	            	-    },
        	            	-    "mlflow_run_name": null,
        	            	-    "sweep": null
        	            	+    "est_percent_complete": null
        	            	   }
        	Test:       	TestAccept/air/get-pending
        	Messages:   	air/get-pending/output.txt vs /tmp/TestAcceptairget-pending571979330/002/output.txt
TestAccept/air/help: branch ✅ | main (ce48e57) ❌ | latest (v1.26.0) ❌

main (ce48e57):

acceptance_test.go:1380: Diff:
        --- air/help/output.txt
        +++ /tmp/TestAcceptairhelp3725083973/002/output.txt
        @@ -96,8 +96,7 @@
           databricks air get JOB_RUN_ID [flags]
         
         Flags:
        -  -h, --help[=true|false]             help for get
        -      --include-config[=true|false]   Include stored config in JSON (downloads over 1 MiB are omitted; may contain plaintext env_variables and parameters)
        +  -h, --help[=true|false]   help for get
         
         Global Flags:
               --debug[=true|false]   enable debug logging
        
FAIL

latest (v1.26.0):

acceptance_test.go:1380: Diff:
        --- air/help/output.txt
        +++ /tmp/TestAcceptairhelp561075165/002/output.txt
        @@ -2,48 +2,34 @@
         === help
         
         >>> [CLI] air --help
        -Run GPU workloads on Databricks serverless compute.
        +Run and manage AI Runtime training workloads on Databricks serverless GPU compute.
         
        -Describe a workload in a YAML file and submit it with "databricks air run".
        -Follow a run with "databricks air logs" and "databricks air get", or see your
        -active runs with "databricks air list".
        +These commands are under active development.
         
         Usage:
           databricks air [command]
         
        -Run workloads:
        -  run             Submit a workload from a YAML config
        -
        -Manage runs:
        +Available Commands:
           cancel          Cancel one or more runs
        -  get             Show a run's status, configuration, and timing
        -  list            List your active runs
        -  logs            Stream or fetch a run's logs
        +  convert-to-dabs Convert an AIR run YAML into a Databricks Asset Bundle
        +  get             Show status, configuration, and timing details for a specified run
        +  images          Manage container images for AI Runtime
        +  list            List active runs for the current user
        +  logs            Stream or fetch logs for a run
        +  pools           View provisioned GPU pools
        +  run             Submit a training workload from a YAML config
         
        -Package and deploy:
        -  convert-to-dabs Convert a workload YAML into a Databricks Asset Bundle
        -  images          Push container images for custom environments
        -
        -Provisioned capacity:
        -  pools           View provisioned GPU pools, if any (not required to run)
        -
         Flags:
        -  -h, --help[=true|false]   help for air
        +  -h, --help   help for air
         
         Global Flags:
        -      --debug[=true|false]   enable debug logging
        -  -o, --output type          output type: text or json (default text)
        -  -p, --profile string       ~/.databrickscfg profile
        -  -t, --target string        bundle target to use (if applicable)
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
         
         Use "databricks air [command] --help" for more information about a command.
         
        -Learn more:
        -  YAML fields and example  databricks air run -h config
        -  Quickstart (AWS)         https://docs.databricks.com/aws/en/machine-learning/ai-runtime/quickstart
        -  Quickstart (Azure)       https://learn.microsoft.com/azure/databricks/machine-learning/ai-runtime/quickstart
        -  Coding agent skill       databricks aitools install --skills-only --skills databricks-ai-runtime
        -
         === list help
         
         >>> [CLI] air list --help
        @@ -52,9 +25,7 @@
         Filters:
           Use --filter KEY=VALUE per condition. A run must match every condition.
         
        -  accelerator_type  Accelerator family or full YAML type. Examples:
        -                    A10, H100, GPU_1xA10, GPU_8xH100.
        -                    Workspace types: databricks air run -h config.compute.accelerator_type
        +  accelerator_type  Accelerator type, such as A10 or H100.
           experiment        Case-insensitive glob matched against the experiment name.
           num_accelerators  Total GPU count.
           user              Run creator identifier.
        @@ -65,78 +36,71 @@
         Examples:
           databricks air list --filter accelerator_type=H100
         
        -  databricks air list --filter accelerator_type=GPU_8xH100
        -
           databricks air list --all-status \
             --filter 'experiment=qwen*' \
             --filter num_accelerators=8 \
             --filter user=person@example.com
         
         Flags:
        -      --all-status[=true|false]   Show runs in all states (default: active only)
        -      --all-users[=true|false]    Show runs from all users
        -      --filter stringArray        Filter runs by KEY=VALUE (repeatable)
        -  -h, --help[=true|false]         help for list
        -      --limit int                 Maximum number of runs to show (default 20)
        +      --all-status           Show runs in all states (default: active only)
        +      --all-users            Show runs from all users
        +      --filter stringArray   Filter runs by KEY=VALUE (repeatable)
        +  -h, --help                 help for list
        +      --limit int            Maximum number of runs to show (default 20)
         
         Global Flags:
        -      --debug[=true|false]   enable debug logging
        -  -o, --output type          output type: text or json (default text)
        -  -p, --profile string       ~/.databrickscfg profile
        -  -t, --target string        bundle target to use (if applicable)
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
         
         === get help
         
         >>> [CLI] air get --help
        -Show a run's status, configuration, and timing.
        +Show status, configuration, and timing details for a specified run.
         
        -JOB_RUN_ID is the job run ID returned by "databricks air run".
        +JOB_RUN_ID is the job run ID returned by "air run".
         
         Usage:
           databricks air get JOB_RUN_ID [flags]
         
         Flags:
        -  -h, --help[=true|false]             help for get
        -      --include-config[=true|false]   Include stored config in JSON (downloads over 1 MiB are omitted; may contain plaintext env_variables and parameters)
        +  -h, --help   help for get
         
         Global Flags:
        -      --debug[=true|false]   enable debug logging
        -  -o, --output type          output type: text or json (default text)
        -  -p, --profile string       ~/.databrickscfg profile
        -  -t, --target string        bundle target to use (if applicable)
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
         
         === pools help
         
         >>> [CLI] air pools --help
        -View GPU pools provisioned for your workspace.
        +View provisioned GPU pools
         
        -A GPU pool is dedicated accelerator capacity that your Databricks account team
        -provisions. Pools are optional: a run uses one only when its YAML sets
        -compute.pool_id.
        -
         Usage:
           databricks air pools [flags]
           databricks air pools [command]
         
         Available Commands:
        -  get         Show a GPU pool and its accelerator usage
        +  get         Show a GPU pool, including its accelerator usage (POOL_ID may be omitted when the workspace has exactly one pool)
           list        List the GPU pools available to the current workspace
         
         Flags:
        -  -h, --help[=true|false]   help for pools
        +  -h, --help   help for pools
         
         Global Flags:
        -      --debug[=true|false]   enable debug logging
        -  -o, --output type          output type: text or json (default text)
        -  -p, --profile string       ~/.databrickscfg profile
        -  -t, --target string        bundle target to use (if applicable)
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
         
         Use "databricks air pools [command] --help" for more information about a command.
         
         === images help
         
         >>> [CLI] air images --help
        -Push container images for custom environments
        +Manage container images for AI Runtime
         
         Usage:
           databricks air images [flags]
        @@ -146,13 +69,13 @@
           push        *Preview* Push a container image to Databricks Artifact Registry
         
         Flags:
        -  -h, --help[=true|false]   help for images
        +  -h, --help   help for images
         
         Global Flags:
        -      --debug[=true|false]   enable debug logging
        -  -o, --output type          output type: text or json (default text)
        -  -p, --profile string       ~/.databrickscfg profile
        -  -t, --target string        bundle target to use (if applicable)
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
         
         Use "databricks air images [command] --help" for more information about a command.
         
... (92 more lines truncated, raise DATABRICKS_CLI_TEST_MAX_LOG to see more)

@eng-dev-ecosystem-bot

eng-dev-ecosystem-bot commented Nov 13, 2026 •

Copy link
Copy Markdown
Collaborator

✅ Integration test report

Commit: 7528690

Run: 43972030165

Env 🔄​flaky 💚​RECOVERED ✅​pass 🙈​skip Time
💚​ aws linux-2core-8gb 1 270 20 10:58
🔄​ aws-windows-latest-4core-16gb 1 1 271 18 10:16
🔄​ azure linux-2core-8gb 1 1 268 20 9:54
💚​ azure-windows-latest-4core-16gb 1 271 18 8:18
💚​ gcp linux-2core-8gb 1 270 20 9:51
💚​ gcp-windows-latest-4core-16gb 1 272 18 7:42
Test Name aws linux-2core-8gb aws-windows-latest-4core-16gb azure linux-2core-8gb azure-windows-latest-4core-16gb gcp linux-2core-8gb gcp-windows-latest-4core-16gb
💚​ TestAccept 💚​R 💚​R 💚​R 💚​R 💚​R 💚​R
🔄​ TestSyncIncrementalFileSync ✅​p ✅​p 🔄​f ✅​p ✅​p ✅​p
🔄​ TestSyncIncrementalSyncFileToPythonNotebook ✅​p 🔄​f ✅​p ✅​p ✅​p ✅​p
Top 11 slowest tests (at least 2 minutes):
duration env testname
3:43 aws-windows-latest-4core-16gb TestAccept
3:28 gcp-windows-latest-4core-16gb TestAccept
3:22 aws-windows-latest-4core-16gb TestFilerWorkspaceFilesExtensionsStat
3:20 azure-windows-latest-4core-16gb TestAccept
3:07 gcp-windows-latest-4core-16gb TestSyncFullFileSync
2:45 azure-windows-latest-4core-16gb TestFilerWorkspaceFilesExtensionsDelete
2:41 azure-windows-latest-4core-16gb TestFilerWorkspaceFilesExtensionsRead
2:22 aws linux-2core-8gb TestTelemetryEndpoint
2:18 gcp linux-2core-8gb TestFilerWorkspaceFilesExtensionsRead
2:18 aws-windows-latest-4core-16gb TestFilerRecursiveDelete/workspace_files
2:02 aws linux-2core-8gb TestFilerWorkspaceFilesExtensionsStat

artemy-kolesnikov and others added 8 commits November 13, 2026 23:48
Co-authored-by: Isaac <no-reply@databricks.com>
Co-authored-by: Isaac <no-reply@databricks.com>
…etails

Co-authored-by: Isaac <no-reply@databricks.com>
Co-authored-by: Isaac <no-reply@databricks.com>
…etails

Co-authored-by: Isaac <no-reply@databricks.com>
Co-authored-by: Isaac <no-reply@databricks.com>
…etails

Co-authored-by: Isaac <no-reply@databricks.com>
The config downloaded for the JSON output is reported verbatim, so a config
uploaded from a Windows checkout (CRLF) produced different JSON than the
same config uploaded from Unix (LF). Normalize the line endings for the
machine-readable field; the text display already reformats the config.

Co-authored-by: Isaac <no-reply@databricks.com>
@artemy-kolesnikov
artemy-kolesnikov marked this pull request as ready for review November 16, 2026 17:17
@artemy-kolesnikov
artemy-kolesnikov requested review from a team as code owners November 16, 2026 17:17

@vinchenzo-db vinchenzo-db left a comment

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

overall lgtm, but consider if we want to enable InsecureSkipVerify

Comment thread cmd/air/render.go
transport := cfg.Transport
if transport == nil {
transport = http.DefaultTransport
}

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Codex flags that we don't cover the InsecureSkipVerify case;

so it should be:

if cfg.Transport != nil {
    return cfg.Transport
}
if cfg.InsecureSkipVerify {
    // Create a transport with certificate verification disabled.
}

artemy-kolesnikov and others added 6 commits November 16, 2026 18:33
# Conflicts:
#	cmd/air/list_detail_test.go
The fixture's fake run has no max_retries on its task, which the Jobs API
leaves out, so the reported limit is now N/A instead of 0.

Co-authored-by: Isaac <no-reply@databricks.com>
…etails

# Conflicts:
#	acceptance/air/help/output.txt
#	cmd/air/list_detail_test.go
Base automatically changed from CNXT-2613-max-retries-na to main November 16, 2026 22:14
Co-authored-by: Isaac <no-reply@databricks.com>
@github-actions github-actions Bot added the AIR Databricks AI Runtime CLI label Nov 16, 2026
@artemy-kolesnikov
artemy-kolesnikov added this pull request to the merge queue Nov 16, 2026
Merged via the queue into main with commit 479098f Nov 16, 2026
28 checks passed
@artemy-kolesnikov
artemy-kolesnikov deleted the CNXT-2612-air-get-json-details branch November 16, 2026 23:14
@eng-dev-ecosystem-bot

Copy link
Copy Markdown
Collaborator

❌ Integration test report

Commit: 479098f

Run: 43977666454

Env ❌​FAIL 🟨​KNOWN 🔄​flaky 💚​RECOVERED ✅​pass 🙈​skip Time
❌​ aws linux-2core-8gb 18 4 9 1604 1335 288:56
❌​ azure linux-2core-8gb 9 1 2 10 1593 1343 300:50
❌​ gcp linux-2core-8gb 9 1 3 12 1597 1341 304:37
34 interesting tests: 18 FAIL, 7 RECOVERED, 5 flaky, 4 KNOWN
Test Name aws linux-2core-8gb azure linux-2core-8gb gcp linux-2core-8gb
🟨​ TestAccept 🟨​K 🟨​K 🟨​K
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_cross_target ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_cross_target/DMS= ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_cross_target/DMS=true ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_remote_addition ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_remote_addition/DMS= ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/cluster_policy_remote_addition/DMS=true ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/policy_injected_cluster_fields ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/policy_injected_cluster_fields/DMS= ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/config-remote-sync/policy_injected_cluster_fields/DMS=true ❌​F ❌​F ❌​F
❌​ TestAccept/bundle/resources/apps/inline_config ❌​F ✅​p ✅​p
❌​ TestAccept/bundle/resources/apps/inline_config/DMS= ❌​F ✅​p ✅​p
🟨​ TestAccept/bundle/resources/apps/lifecycle-started 🟨​K 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-omitted 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-omitted/DMS= 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-omitted/DMS=true 💚​R 💚​R 💚​R
🔄​ TestAccept/bundle/resources/apps/lifecycle-started-toggle 💚​R 🔄​f 💚​R
💚​ TestAccept/bundle/resources/apps/lifecycle-started-toggle/DMS= 💚​R 💚​R 💚​R
🔄​ TestAccept/bundle/resources/apps/lifecycle-started-toggle/DMS=true 💚​R 🔄​f 💚​R
🟨​ TestAccept/bundle/resources/apps/lifecycle-started/DMS= 🟨​K 💚​R 💚​R
🟨​ TestAccept/bundle/resources/apps/lifecycle-started/DMS=true 🟨​K 💚​R 💚​R
🔄​ TestAccept/bundle/resources/grants/volume_change_name ✅​p ✅​p 🔄​f
🔄​ TestAccept/bundle/resources/grants/volume_change_name/DMS=true ✅​p ✅​p 🔄​f
❌​ TestAccept/bundle/resources/pipelines/lakeflow-pipeline ❌​F ✅​p ✅​p
❌​ TestAccept/bundle/resources/pipelines/lakeflow-pipeline/DMS= ❌​F ✅​p ✅​p
❌​ TestAccept/bundle/resources/postgres_branches/purge_on_delete_transitions ❌​F ✅​p ✅​p
❌​ TestAccept/bundle/resources/postgres_branches/purge_on_delete_transitions/DMS=true ❌​F ✅​p ✅​p
❌​ TestAccept/bundle/resources/postgres_branches/update_protected ❌​F ✅​p ✅​p
❌​ TestAccept/bundle/resources/postgres_branches/update_protected/DMS=true ❌​F ✅​p ✅​p
💚​ TestAccept/bundle/resources/postgres_synced_tables/recreate 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/postgres_synced_tables/recreate/DMS= 💚​R 💚​R 💚​R
💚​ TestAccept/bundle/resources/postgres_synced_tables/recreate/DMS=true 💚​R 💚​R 💚​R
🔄​ TestSyncIncrementalFileSync ✅​p ✅​p 🔄​f
❌​ TestTelemetryEndpoint ❌​F ✅​p ✅​p
Top 50 slowest tests (at least 2 minutes):
duration env testname
10:47 azure linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=
9:41 gcp linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=
9:23 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=true
9:12 azure linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=true
9:12 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=
8:36 gcp linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started/DMS=true
8:16 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/deploy/local_ssd_count/DMS=true
7:46 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/deploy/local_ssd_count/DMS=
7:27 azure linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=
7:13 aws linux-2core-8gb TestAccept/bundle/resources/materialization_sets/immutable/DMS=true
6:57 aws linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=true
6:56 azure linux-2core-8gb TestAccept/bundle/templates/default-python/combinations/serverless/DLT=yes/DMS=/NBOOK=yes/PY=yes/READPLAN=
6:55 aws linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=
6:53 aws linux-2core-8gb TestAccept/bundle/resources/clusters/deploy/simple/DMS=
6:46 azure linux-2core-8gb TestAccept/bundle/select/deletion/DMS=
6:44 gcp linux-2core-8gb TestAccept/bundle/config-remote-sync/multiple_resources/DMS=true
6:40 azure linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started/DMS=true
6:38 aws linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started-toggle/DMS=
6:09 gcp linux-2core-8gb TestAccept/bundle/quiet-levels/DMS=
6:07 azure linux-2core-8gb TestAccept/pipelines/run/refresh-flags
6:04 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=true
6:01 gcp linux-2core-8gb TestAccept/bundle/config-remote-sync/multiple_resources/DMS=
5:57 azure linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=true
5:47 azure linux-2core-8gb TestAccept/bundle/config-remote-sync/multiple_resources/DMS=
5:47 azure linux-2core-8gb TestAccept/bundle/resources/schemas/rename_then_change/DMS=
5:42 aws linux-2core-8gb TestAccept/bundle/resources/schemas/rename_then_change/DMS=
5:27 azure linux-2core-8gb TestAccept/bundle/templates/default-python/integration_classic/DMS=/UV_PYTHON=3.11
5:26 azure linux-2core-8gb TestAccept/bundle/templates/default-python/combinations/classic/DLT=no/DMS=/NBOOK=yes/PY=yes/READPLAN=
5:26 azure linux-2core-8gb TestAccept/bundle/resources/schemas/rename_then_change/DMS=true
5:26 aws linux-2core-8gb TestAccept/bundle/templates/default-python/integration_classic/DMS=/UV_PYTHON=3.10
5:26 aws linux-2core-8gb TestAccept/bundle/templates/default-python/combinations/classic/DLT=yes/DMS=/NBOOK=yes/PY=yes/READPLAN=
5:19 azure linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started-toggle/DMS=
5:19 aws linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started-omitted/DMS=
5:07 aws linux-2core-8gb TestAccept/pipelines/run/refresh-flags
5:04 aws linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started-omitted/DMS=true
5:04 gcp linux-2core-8gb TestAccept/bundle/resources/apps/inline_config/DMS=true
4:59 gcp linux-2core-8gb TestAccept/bundle/invariant/delete_idempotent/DMS=/INPUT_CONFIG=model_serving_endpoint.yml.tmpl/READPLAN=1
4:59 azure linux-2core-8gb TestAccept/bundle/config-remote-sync/multiple_resources/DMS=true
4:56 aws linux-2core-8gb TestAccept/bundle/resources/clusters/deploy/data_security_mode/DMS=true
4:54 aws linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=true
4:47 gcp linux-2core-8gb TestAccept/bundle/resources/models/basic/DMS=
4:45 aws linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=
4:43 gcp linux-2core-8gb TestAccept/bundle/invariant/delete_idempotent/DMS=/INPUT_CONFIG=sql_warehouse.yml.tmpl/READPLAN=1
4:40 azure linux-2core-8gb TestAccept/bundle/invariant/no_drift/DMS=true/INPUT_CONFIG=job_with_task.yml.tmpl/READPLAN=
4:36 gcp linux-2core-8gb TestAccept/bundle/resources/clusters/lifecycle-started-toggle/DMS=
4:36 azure linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started-omitted/DMS=
4:34 aws linux-2core-8gb TestAccept/bundle/templates/default-python/combinations/serverless/DLT=yes/DMS=/NBOOK=no/PY=yes/READPLAN=
4:31 azure linux-2core-8gb TestAccept/bundle/templates/default-python/combinations/classic/DLT=yes/DMS=/NBOOK=no/PY=no/READPLAN=1
4:29 azure linux-2core-8gb TestAccept/bundle/templates/default-python/combinations/classic/DLT=no/DMS=/NBOOK=yes/PY=no/READPLAN=
4:28 aws linux-2core-8gb TestAccept/bundle/resources/apps/lifecycle-started-toggle/DMS=true

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

AIR Databricks AI Runtime CLI

Projects

None yet

Development

Successfully merging this pull request may close these issues.

3 participants